R1 |
|
5.6K Resistor (Green, Blue, Red) ¼ watt
|
R2 |
|
15K Resistor (Brown, Green, Orange) ¼
watt |
R3 |
|
2.2K Resistor (Red, Red, Red) ¼ watt
|
R4,R8 |
|
1K Resistor (Brown, Black, Red) ¼ watt
|
R5 |
|
4.7K Resistor (Yellow, Violet, Red) ¼
watt |
R6 |
|
22 ohm Resistor (Red, Red, Black) ¼ watt
|
R7,R9 |
|
10K Resistor (Brown, Black, Orange) ¼
watt |
R10 |
|
10K Trimmer pot, ¼ watt or larger
|
C1 |
|
.01uf Ceramic disk capacitor |
C2,C4,C6,C9 |
|
.1uf Ceramic disk capacitor |
C3 |
|
.0028uf Ceramic disk capacitor (Use two .001uf
capacitors and one 820pf capacitor in parallel.) |
C5 |
|
68pf Ceramic disk capacitor |
C7,C10 |
|
.001uf Ceramic disk capacitor |
C8 |
|
100uf electrolytic capacitor. (observe polarity)
|
C11,C13 |
|
390pf Silver Mica capacitor |
C12 |
|
820pf Silver Mica capacitor |
D1 |
|
15 volt Zener diode. 1N4744 or similar.
|
Y1 |
|
7.040 MHz or 7.122 Mhz crystal |
T1 |
|
T50-2 toroid. 34 turns #26 wire for primary. 6
turns #22 wire for secondary. |
T2 |
|
FT37-43 toroid. 14 turns #26 wire for primary. 4
turns #22 wire for secondary. |
L1 |
|
T68-2 toroid. 10 turns #22 wire. |
L2,L3 |
|
T37-2 toroid. 16 turns #26 wire. |
Q1 |
|
2N3906 transistor |
Q2 |
|
2N3904 transistor |
Q3 |
|
2N3053 transistor. Must use TO-39 or similar type
heat sink. |
Q4 |
|
IRF510 Power Mosfet transistor. Must use TO-220
heat sink(276-1363). |
S1 |
|
Any suitable SPDT switch |